MOSQUITO REPELLENT:
Powerful mosquito and droppings repellent that will eliminate insect residue, even dry, present on all surfaces of your vehicle: bodywork, windshield, bumpers, mirrors, headlights, etc. Suitable for all seasons and especially summer because it easily dislodges insects. Can be used for cleaning the entire car, especially on stubborn stains. Directions for use: Spray the mosquito repellent on the vehicle, wait a few seconds and remove with a soft cloth. Repeat the operation if necessary.
RIM CLEANER:
Cleaning rims and hubcaps. This product attacks the aluminum film and removes black brake residue. As it corrodes aluminum, contact time must be very short (1 minute). Do not use on unvarnished aluminum (Porsche Fuchs rims, etc.). For automotive use only.
ACTIVE FOAM:
Concentrated vehicle detergent in foam form for car washes and high-pressure jets. Can be used manually or in a washing machine. Does not drip. Leaves the bodywork clean and shiny without any further treatment. Directions for use: Dilute the product from 5 to 100%. Spray the active foam onto the area to be treated (use a specific nozzle for abundant foam).
BODY SHAMPOO:
Bodywork shampoo is an industrial degreaser for washing vehicles. This powerful product cleans very dirty bodywork, tarpaulins, chassis, etc. This product removes the toughest dirt, restoring the cleanliness and shine of treated surfaces. It respects their original appearance and leaves no trace after rinsing. Low-foaming shampoo for manual use, allowing the improvement of active ingredients. Shampoo can be used in a foam gun with foaming agents suitable for this use. Directions for use: Bodywork shampoo is diluted in water at a rate of 5 to 10% depending on the degree of dirtiness of the vehicles and the implementation of the product. Can be used in high-pressure machines, sprayers, car washes, scrubbers and wash brooms. Spraying: prepare a solution in the sprayer, to do this dilute in water at a rate of 4 to 10% of product. Spray the solution onto the vehicle, always starting from the bottom (leave to act for 1 to 3 minutes) then rinse with cold water under pressure of 70 to 80 bars. The product can be used directly in a pressure washer with a dilution of 1 to 4% using a pressure of 70 to 80 bars and a temperature of 60 to 90°C.
